Description:
Polyforte offers the anti-static floor finish manufactured with alloy cross-linking technique. This premier floor finish is manufactured with acrylic-acid polymer and is combined with coalescent additives, leveling aids and wax emulsions. This fast-drying, wearable floor finish also provides a high-gloss, dust-free finish.
Product Specifications:
Surface resistance: 1x105-1x108Ω
volume resistance: 1x105-1x108Ω
Electrostatic attenuation: <0.3s
Electrification voltage: <70 V
Solid content: 20±0.5%
pH: 8.0-9.0
Specific weight: 1.03 (25℃)
Centrifuge test: 3000rpm, no change after 30 mins
Freezing-thawing test: no change after 3 cyclins
Coverage: 200m2/gal
Shelf life: 1 year minimal under room temperature
Packaging: 1gal/case, 4gal/case, 5gal/case
Anti-static performance has reached the SJ/T11159-98 requirement
Product features:
Transparent/Can be applied on surfaces of all colors
Can be easily spread out on uneven surfaces
Fast drying/ Dries out within 30 mins, less waiting
High gloss/Gives a glossier finish after polishing
Dustproof/Requires minimal effort to maintain the cleanliness of the surfaces
Anti-skidding
Can be easily removed
Common errors and possible solutions:
|
1. |
Low gloss |
humid environment |
Use a fan to speed up air circulation. Must not blow directly to the floor. |
|
The second coat was applied before the first coat dried out |
Must apply the second coat after the first coat dries out |
||
|
Stripping agent was not fully washed off |
Fully remove the stripping agent before applying polish |
||
|
Incomplete buffing |
Buff after 24 hours |
||
|
2. |
Scratches |
Polish is too thick |
Redo after stripping |
|
3. |
Flaking |
Room temperature is too low (<5℃) |
Increase room temperature |
|
Long term usage of basic detergents |
Use neutral detergents |
||
|
Usage of two types of polishes |
Use only one type of polish |
||
|
Buffing pads or polishing pads are too hard |
Choose softer pads |
||
|
4. |
Stripes |
Polish is too thin, mop or floor was not cleaned properly |
Increase the amount of polish applied; Use clean mops and clean floor thoroughly before applying polish |
|
5. |
Fish eye shaped patterns |
Oil stains on the floor or oil-based protective agent has been applied |
Clean floor with degreasing agent or stripping chemicals |
|
6. |
Heavy foot prints |
Polish gets sticky due to low temperature and high humidity |
Buff for a few more times
|
Maintenance and related products
NOTE: The antistatic properties of the floor will be lost if cleaned with water. Cleaning with antistatic dedusting agent P1208 is recommended.
PolyforteTMAntistatic dedusting agent P 1208 is an environmentally friendly dedusting agent with a fresh lemon scent, designed to control static generation and to increase resistance to abrasion. The oil-based solution can effectively clean the floor and prevents dust from accumulating.
General Use Directions:
1. Soak clean mop in the PolyforteTMAntistatic dedusting agent for 12-24 hours, and then wring out.
2. Clean floor with the mop, dust can be removed by gently shaking the mop head.
PolyforteTMStripping Agent is a basic solution which can efficiently remove embedded dirt and old finish to provide a clean surface for reapplying polish. Compatibility test before usage is recommended.
